Orange Pi 2 Model H3 1.6GHz QuadCore Board With Built in Wifi

What can I do with Orange Pi Plus2?

  • Build…
  • A computer
  • A wireless server
  • Games
  • Music and sounds
  • HD video
  • A speaker
  • Android
  • Scratch
  • Pretty much anything else, because Orange Pi Plus2 is open source

Who’s it for?

Orange Pi Plus2 is for anyone who wants to start creating with technology – not just consuming it. It’s a simple, fun, useful tool that you can use to start taking control of the world around you.

It’s an open-source single-board computer. It can run Android 4.4 , Ubuntu, Debian, Rasberry Pi Image, it uses the AllWinner H3 SoC, and has 2GB DDR3 SDRAM.

  1. SoC – Allwinner H3 quad core Cortex A7 1.6 GHz with ARM Mali-400MP2 GPU up to 600 MHz
  2. System Memory – 2GB DDR3
  3. Storage – 8GB eMMC, micro SD card slot, SATA interface (via a USB to SATA chip),
  4. Video Output – HDMI, AV port
  5. Audio I/O – HDMI, AV port, on-board microphone
  6. Connectivity – 10/100/1000M Ethernet, 802.11 b/g/n Wi-Fi (Realtek RTL8189ETV)
  7. USB – 4x USB 2.0 host ports, 1x micro USB OTG port
  8. Camera – CSI Interface
  9. Expansions – 40-pin Raspberry Pi Model A+/B+ (mostly) compatible header
  10. Debugging – 3-pin UART header for serial console
  11. Misc – IR receiver; Power, recovery, and upgrade buttons
  12. Power Supply – 5V/2A via barrel jack or micro USB OTG; Power and status LEDs
  13. Dimensions – 108 x 67 mm (Pi Plus is 108 x 60 mm)


CPU H3 Quad-core Cortex-A7 H.265/HEVC 4K
GPU ·Mali400MP2 GPU @600MHz
·Supports OpenGL ES 2.0
Memory (SDRAM) 2GB DDR3 (shared with GPU)
Onboard Storage TF card (Max. 64GB) / MMC card slot , up to 2T on 2.5 SATA disk
16GB EMMC Flash
Onboard Network 10/100/1000M Ethernet RJ45
Onboard WIFI Realtek RTL8189ETV, IEEE 802.11 b/g/n
Video Input
  • A CSI input connector Camera:
  • Supports 8-bit YUV422 CMOS sensor interface
  • Supports CCIR656 protocol for NTSC and PAL
  • Supports SM pixel camera sensor 
  • Supports video capture solution up to 1080p@30fps
Audio Input MIC
Video Outputs
  • Supports HDMI output with HDCP 
  • Supports HDMI CEC
  • Supports HDMI 30 function
  • Integrated CVBS
  • Supports simultaneous output of HDMI and CVBS
Audio Output 3.5 mm Jack and HDMI
Power Source DC input can supply power, but USB OTG input don’t supply power
USB 2.0 Ports Four USB 2.0 HOST, one USB 2.0 OTG
Buttons Power Button(SW4), Recovery Button(SW3), Uboot Button(SW2)
Low-level peripherals 40 Pins Header,compatible with Raspberry Pi B+
GPIO(1×3) pin UART, ground.
LED Power led & Status led
Other IR input
Supported OS Android, Ubuntu, Debian, Rasberry Pi Image
Manufacturer BeagleBone
Voltage (V) 5
Current (A) 24m
Model Orange Pi 2 Model H3
Processor H3 Quad-core Cortex-A7 H.265/HEVC 4K
Operating System NA
Frequency 1.6GHz
Hardrive TF card (Max. 64GB) / MMC card slot , up to 2T on 2.5 SATA disk 16GB EMMC Flash
Memory 2GB DDR3
Wifi Yes
Bluetooth No
Output Port 3.5 mm Jack , HDMI,Four USB 2.0 HOST, one USB 2.0 OTG,10/100/1000M Ethernet RJ45
Num of Core Quad
Num of Ports NA
Size (mm) NA