, ,

Steady CE Approved T-50D 5v 12v 24v Trip output dc power supply Module

Module Properties: 5A High Power 75W DC-DC adjustable step-down module
Input voltage: DC 4-38V (Note:input voltage not exceeding 38V)
Output voltage: DC 1.25V ~ 36V continuously adjustable ( the input voltage must be higher than the output voltage 1.5V )
Output current: max 5A, recommended for use in the 4.5A.
Output power: up to 75W, more than 50W, Please enhance heat dissipation
Voltmeter error: ± 0.05V
Measure range: 0 ~ 40V ( please ensure that the input voltage is 4.5V or more)
voltmeter range: 4 to 40V, error ±0.1V
Operating frequency: 180KHz
Conversion efficiency: up to 96%
Load regulation: S (I) ≤ 0.8%
Voltage Regulation: S (u) ≤ 0.8%
Built in thermal shutdown function
Built in current limit function
Built in output short protection function
Input reverse polarity protection:None(if required, high current diode in series with the input).
Size: 66 x39 x18mm

 900.0

Compare
MODEL T-50A T-50B  T-50C T-50D
    OUTPUT DC VOLTAGE 5V ,12V, -5V 5V ,12V ,-12V 5V ,15V ,-15V 5V ,12V, 24V
RATED CURRENT 7A , 1A ,  1A 5A , 1A ,   1A 4A  ,1A   ,  1A 3A , 1A ,  1A
CURRENT RANGE 0.6 ~ 7A ,0.2 ~ 1A, 0.2 ~ 1A 0.6 ~ 5A, 0.2 ~ 1A, 0.2 ~ 1A 0.6~4A, 0.2 ~ 1A, 0.2 ~ 1A 0.6~4A, 0.2 ~ 1.2A, 0.2 ~ 1.2A
RATED POWER 52W 49W 50W 51W
RIPPLE & NOISE (max.) Note.2 100mVp-p , 100mVp-p  , 100mVp-p 100mVp-p , 100mVp-p , 100mVp-p 100mVp-p , 100mVp-p , 100mVp-p 50mVp-p , 120mVp-p , 120mVp-p
VOLTAGE ADJ. RANGE CH1:4.75 ~ 5.5V CH1:4.75 ~ 5.5V CH1:4.75 ~ 5.5V CH1:4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3 ±2.0% ±5.0% ±5.0% ±2.0% ±5.0% ±5.0% ±2.0% ±5.0% ±5.0% ±2.0% ±6.0% ±6.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%  ±0.5% ±1.0%±1.0%
LOAD REGULATION +1.0% +4.0% +4.0% 0.09 0.09 0.11
SETUP, RISE, HOLD TIME 200ms, 100ms, 16ms at full load 200ms, 80ms, 16ms at full load
     INPUT VOLTAGE RANGE 85 ~ 132VAC/170 ~ 264VAC selected by switch 240 ~ 370VDC
FREQUENCY RANGE 47 ~63Hz
EFFICIENCY(Typ.) 66% 69% 71% 72%
AC CURRENT 1.6A/115VAC 0.8A/230VAC
INRUSH CURRENT(max.) COLD START 20A/115VAC 40A/230VAC
LEAKAGE CURRENT <0.5mA/240VAC
 PROTECTION OVER LOAD 105 ~ 150% rated output power
Protection type : Fold back current limiting, recovers automatically after fault condition is removed
ENVIRONMENT WORKING TEMP. 20 ~ 90% RH non-condensing
WORKING HUMIDITY -10 ~ +60”C (Refer to output load derating curve), 20 ~ 90% RH
STORAGE TEMP., HUMIDITY -20 ~ +85°C, 10 ~ 95% RH
TEMP. COEFFICIENT +0.03%/°C (0 ~ 50°C)on +5V output
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC SAFETY STANDARDS Design refer to UL1012
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
   OTHERS MTBF 470.2K hrs min. MIL-HDBK-217F (25°C)
DIMENSION 159*97*38mm (L*W*H)
PACKING 0.54Kg; 24pcs/14Kg/0.75CUFT
      NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2.  Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3.  Tolerance : includes set up tolerance, line regulation and load regulation.
SKU: MOD-082 Categories: , , Tags: ,